Rocom Doortello Home Betriebsanweisung PDF herunterladen (Seite 11)

User guideDoortello HomeIssue 1.00

Page 11

Chime buttons

Each of the 6 chime buttons can be programmed to dial a telephone number

with up to 16 digits. Also special functions can be assigned to the buttons.

The single chime buttons have a decimal address from 1 to 6. As digits inside a

telephone number you can use all numbers from 1 to 0, as well the special

codes * , # and the functions „flash“ and pause.

From factory no numbers or functions are programmed for the buttons.

To program the chime buttons and functional keys follow this procedure:

*#1 OK tone {telephone number of function} ** {button address} OK

tone

As digit for the telephone number (max 16 digit for each telephone number)

the following values can be entered:

Digits: 1,2,3,4,5,6,7,8,9,0;

Special dial functions: ##1 , will dial the code # (is considered as 1

digit);

##2 , will dial the code * (is considered as 1

digit);

##3 , will make a dial pause of 2 seconds (default

value) duration (is considered as 1 digit);

##4 , will send a „Flash“ (short line interruption,

„Recall“ button) of 80 ms (default value)

Please take care that the default data load will delete all programmed

telephone numbers and values. If you want to delete or change just one

telephone number is the default data reload not very useful. Use instead the

procedure described in the chapter Delete telephone number.

Please note!

The above indicated procedure considers that the password has his standard

value 1234. If the password was changed you have to use the new

password instead of 1234.

Please note!

The default data are loaded only after the input of the digit 3 to terminate

the programming mode.

Please note!

If the password has been lost it is possible the load the default data using a

master password. In this case the factory default data a reloaded as well the

standard password. Please contact your dealer for more details.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Keine Kommentare

Rocom Doortello Home Betriebsanweisung Seite 11